Description
Metric PVC-U Pressure Pipe – 3 Metre Lengths (PN10)
📄 Size GuideOur Metric PVC-U Pressure Pipe – 3 Metre Lengths (PN10) provides a durable, lightweight and corrosion-resistant solution for pressurised water distribution, agricultural irrigation, industrial pipework and general fluid transfer applications.
Manufactured from rigid unplasticised polyvinyl chloride (PVC-U), this grey metric pressure pipe is supplied in convenient 3 metre (3000mm) lengths. These lengths offer a practical balance between ease of handling and installation efficiency, making them suitable for both commercial and domestic applications.
With a nominal pressure rating of PN10 (10 bar at 20°C), this metric PVC pressure pipe is designed for use with compatible metric PVC solvent weld fittings. Its smooth internal bore helps minimise friction losses, while the rigid PVC-U construction provides resistance to corrosion and a wide range of compatible liquids.
Key Features & Benefits
- Material: Rigid PVC-U (Unplasticised Polyvinyl Chloride)
- Pipe Type: Metric PVC Pressure Pipe
- Supplied Length: 3 Metres (3000mm)
- Pressure Rating: PN10 – 10 bar at 20°C
- Colour: Grey
- Available Lengths: 3m and 5m
- Corrosion Resistant: Suitable for water and compatible liquids
- Smooth Internal Bore: Helps minimise friction losses
- Lightweight Construction: Easy to transport, cut and install
- Jointing Method: Solvent weld using compatible metric PVC fittings
- Applications: Irrigation, water distribution, pumping and industrial pipework
Important – Socket End Availability
Some of our 3 metre metric PVC pressure pipe lengths may be supplied with an integral socket end, allowing two lengths of pipe to be joined together without requiring a separate coupling.
However, we cannot guarantee that pipes will be supplied with a socket end, as this depends on current stock and the manufacturer's production specifications.
If you specifically require pipe with a socket end, please contact us before placing your order so we can check availability.
Alternatively, separate metric PVC equal sockets can be used to join plain-ended pipe lengths.
Shop Metric PVC Equal Sockets →Metric PVC PN10 Pipe – Size & Dimensions Guide
Metric PVC pressure pipe is sized according to its outside diameter (OD), measured in millimetres. Unlike imperial PVC pipe, the nominal metric size corresponds directly to the outside diameter of the pipe.
The table below shows common metric PVC pipe sizes, their outside diameters and the PN10 pressure classification. Actual inside diameters and wall thicknesses depend on the manufacturer's specification.
| Metric Pipe Size | Outside Diameter (mm) | Pressure Rating |
|---|---|---|
| 20mm | 20.0 | PN10 |
| 25mm | 25.0 | PN10 |
| 32mm | 32.0 | PN10 |
| 40mm | 40.0 | PN10 |
| 50mm | 50.0 | PN10 |
| 63mm | 63.0 | PN10 |
| 75mm | 75.0 | PN10 |
| 90mm | 90.0 | PN10 |
| 110mm | 110.0 | PN10 |
| 125mm | 125.0 | PN10 |
| 140mm | 140.0 | PN10 |
| 160mm | 160.0 | PN10 |
Note: Pipe dimensions are nominal and subject to manufacturing tolerances. Confirm available sizes and specifications before ordering.
Also Available in 5 Metre Lengths
In addition to our standard 3 metre metric PVC pressure pipe, T-mex Express can also supply 5 metre lengths. These longer lengths are ideal for larger installations, helping to reduce the number of joints required across longer pipe runs.
Please contact our team for availability, pricing and delivery options for 5m metric PVC pipe.
How to Measure Metric PVC Pipe
Metric PVC pressure pipe is measured by its outside diameter (OD), not its internal bore. For example, 63mm metric PVC pipe measures approximately 63mm across the outside.
To identify the correct pipe size, measure the outside diameter using vernier callipers and compare the measurement with the table above.
Important: Metric and imperial PVC pressure pipes are not directly interchangeable. For example, 63mm metric PVC pipe has a 63mm outside diameter, whereas 2" imperial PVC pressure pipe measures approximately 60.3mm outside diameter. A suitable transition fitting is required to connect the two systems.
Typical Applications
- Agricultural irrigation and water distribution
- Industrial water supply and fluid transfer
- Pumping systems and pump discharge pipework
- Water treatment and filtration systems
- Swimming pool and aquatic installations, where suitable
- Commercial and industrial process pipework
- Repairs, extensions and modifications to existing PVC pipework
Not Sure What Size PVC Pipe You Have?
Imperial and metric PVC pipe sizes can be confusing. Our T-mex Express Tech Hub explains how to measure PVC pipe, identify imperial and metric sizes, and select the correct fittings for your installation.
Read Our PVC Pipe Size Guide →Installation & Important Information
Metric PVC-U pressure pipe should be installed using compatible metric PVC pressure fittings and suitable PVC solvent cement. Ensure all pipe ends are clean, correctly prepared and fully inserted into the fittings.
PN10 pressure ratings are based on specified reference conditions, typically 20°C. Allowable working pressure decreases as operating temperature increases. Always follow the manufacturer's installation guidelines.
Important: Do not solvent weld metric PVC pipe directly into imperial PVC fittings. Use a suitable metric-to-imperial adaptor where a transition between systems is required.
© All text and product images are the intellectual property and copyright of T-mex Express